Redmine

27.11.2023

09:36 Biwak Feature #440 (Erledigt): RFM69CW: remove magick from packet structure

Maximilian Seesslen

24.11.2023

14:38 Campo Feature #144: implement hwdata stterm command

p/x (char [10])s
dump binary value foo (char[0x80])s
Maximilian Seesslen

20.11.2023

15:32 Canbridge Feature #442 (Neu): Use listening mode

Try to save current. Maximilian Seesslen

15:31 Canbridge Feature #441 (Neu): Measure current consumption in RX mode

v0.1.0 does not use listen mode.
Will be interesting to campare with v0.2.0.
Maximilian Seesslen

11:47 Biwak Feature #440 (Erledigt): RFM69CW: remove magick from packet structure

The pre-magic is within the raw packet structure.
Just handle it like Post-Magic.
Reduce it to one byte to increase... Maximilian Seesslen

11:21 CANBridge Fehler #430 (Erledigt): Transceiving is super slow and errornous

Maximilian Seesslen

11:20 Canbridge Fehler #439 (Neu): Check RSSI instead of delaying

Before sending an package, the RSSI should be checked instead of fixed delay.
Maybe sending multiple CAN-Messages be... Maximilian Seesslen

11:07 Campo Feature #360 (Erledigt): Split further sensor library

This is done: libscapus
Maximilian Seesslen

14.11.2023

14:47 mainSwitch Fehler #434 (Abgewiesen): Power supply on CANBus is very poor

Duplicate Maximilian Seesslen

11:58 mainSwitch Fehler #434 (Abgewiesen): Power supply on CANBus is very poor

The traces are only 0.2mm
"Link":https://www.leiton.de/leiton-tools-spannungsabfall-leiterplatten.html Maximilian Seesslen

12:01 mainSwitch Fehler #435 (Neu): Power supply on CANBus is very poor

The traces are only 0.2mm
"Link":https://www.leiton.de/leiton-tools-spannungsabfall-leiterplatten.html
Sollte eig... Maximilian Seesslen

06.11.2023

16:47 Rufa Feature #431 (Neu): Introduce more noise filtering

Add ferrit beans to power lines and to TC-wires.
Eval-Kit has 10nF between T+/T-. Then ferrit beans in serias at bot... Maximilian Seesslen

16:35 CANBridge Fehler #430 (Erledigt): Transceiving is super slow and errornous

Looks like the default frequencies are completely wrong. They have to be set according to the 868Mhz.
Maybe the data... Maximilian Seesslen