Software

04.12.2023

11:21 Rufa Feature #454 (Neu): Verify smoothener

Smoothing and error detection was implemented.
Once the LED-Lamp was switched off, the noise was completely gone.
... Maximilian Seesslen

30.11.2023

21:03 Biwak Feature #452 (Abgewiesen): curly brace init for periphery typedefs in peripherie constuctors

Should be more clean. Maximilian Seesslen

20:40 Biwak Feature #451 (Erledigt): support direct gpio init

arena can initialize gpios for periphery like CAN, SPI and I2C directly in the generated init-function.
The GPIOs ar... Maximilian Seesslen

15:54 liblepto Feature #450 (Erledigt): CRing: the m_top/m_bottom concept wastes one entry

Use an m_top/m_entries approach.
Would not be thread-save. Additional counter needed.
Round-Counter-Bit would help.... Maximilian Seesslen

15:48 liblepto Fehler #447 (Erledigt): crc32: the finalize step is integrated into calcCrc32()

Maximilian Seesslen

29.11.2023

14:09 Biwak Feature #449 (Abgewiesen): Test "_end_data_flash"

Setting an symbol to the first usable area has some problems on 16k devices when there is no free sectors.
_start_us... Maximilian Seesslen

28.11.2023

18:08 libcampo Feature #448 (Erledigt): hwdata: dump whole eeprom to bin files

the readout can be implemented in gdb script.... Maximilian Seesslen

12:02 liblepto Fehler #447 (Erledigt): crc32: the finalize step is integrated into calcCrc32()

Probably all crc32 calculations in the EEPROMs are wrong.
Unit tests are needed: update_crc32, finalize_crc32...
... Maximilian Seesslen

10:39 liblepto Feature #446 (Erledigt): Catch CRC32 polynom for STM32F1

The result is different than current CRC32.
When unit-Tests for the device will get implemented, the corect algoryth... Maximilian Seesslen

27.11.2023

09:36 Biwak Feature #440 (Erledigt): RFM69CW: remove magick from packet structure

Maximilian Seesslen

24.11.2023

14:38 Campo Feature #144: implement hwdata stterm command

p/x (char [10])s
dump binary value foo (char[0x80])s
Maximilian Seesslen

13:48 libcampo Feature #419 (Erledigt): make .campo optional

Maximilian Seesslen

13:48 libcampo Feature #436 (Erledigt): Activate CVagus again

Maximilian Seesslen

21.11.2023

13:57 libcampo Feature #419: make .campo optional

Before this the candis debug build is:
candis.bin: 114076
now it is:
candis.bin: 114420
But has a lot of new ... Maximilian Seesslen

20.11.2023

15:43 Mito Feature #443 (Neu): implement validate mode

When the button is pressed, the mode shall change.
validate:
* check the cable layout only on start
* check perm... Maximilian Seesslen

15:32 Canbridge Feature #442 (Neu): Use listening mode

Try to save current. Maximilian Seesslen

15:31 Canbridge Feature #441 (Neu): Measure current consumption in RX mode

v0.1.0 does not use listen mode.
Will be interesting to campare with v0.2.0.
Maximilian Seesslen

11:47 Biwak Feature #440 (Erledigt): RFM69CW: remove magick from packet structure

The pre-magic is within the raw packet structure.
Just handle it like Post-Magic.
Reduce it to one byte to increase... Maximilian Seesslen

11:20 Canbridge Fehler #439 (Neu): Check RSSI instead of delaying

Before sending an package, the RSSI should be checked instead of fixed delay.
Maybe sending multiple CAN-Messages be... Maximilian Seesslen

11:07 Campo Feature #360 (Erledigt): Split further sensor library

This is done: libscapus
Maximilian Seesslen

16.11.2023

18:04 libcampo Feature #436 (Erledigt): Activate CVagus again

An template class that already handles default stuff like storing Configuration/HWInfo, handling NMT.
Just the funct... Maximilian Seesslen