Office » Historie » Version 54
Maximilian Seesslen, 12.06.2025 18:07
| 1 | 1 | Maximilian Seesslen | h1. Office |
|---|---|---|---|
| 2 | |||
| 3 | 17 | Maximilian Seesslen | h2. Features |
| 4 | |||
| 5 | 26 | Maximilian Seesslen | Unterm strich alles, was momentan in den Boxen ist als single board Loesung [+RTC, +USB]. |
| 6 | 18 | Maximilian Seesslen | |
| 7 | 17 | Maximilian Seesslen | * RTC |
| 8 | 20 | Maximilian Seesslen | * CAN; -4 Connectors; Bus in, Bus out, CANDis, CANRec, CANIO- |
| 9 | 24 | Maximilian Seesslen | * SSR; CPC1976; 3 Stueck |
| 10 | 1 | Maximilian Seesslen | * Battery |
| 11 | 24 | Maximilian Seesslen | * 5V output mit idealer Diode |
| 12 | 1 | Maximilian Seesslen | * 6 Ausgaenge (OUT+PWM) fuer komplettes Zimmer |
| 13 | 26 | Maximilian Seesslen | * USB for configuration |
| 14 | 50 | Maximilian Seesslen | * |
| 15 | 17 | Maximilian Seesslen | |
| 16 | 47 | Maximilian Seesslen | h2. Extension board 1 |
| 17 | 43 | Maximilian Seesslen | |
| 18 | 4 weitere LEDs ohne MCU |
||
| 19 | 48V PSK |
||
| 20 | 4 x PWM |
||
| 21 | Funktioniert schon ohne Controller board nur mit Netzteil. |
||
| 22 | 1 | Maximilian Seesslen | |
| 23 | 47 | Maximilian Seesslen | h2. Extension board II |
| 24 | |||
| 25 | Pizzaoffen 1200W |
||
| 26 | Wasserkocher 2.400W |
||
| 27 | Geht bis 3000W, 12,5A, max. 16A |
||
| 28 | |||
| 29 | 48 | Maximilian Seesslen | SSR-2528ZD3 kann 25A; Steuerung via 5V. |
| 30 | 52 | Maximilian Seesslen | habe noch ""RA2425-d06":https://www.reichelt.de/de/de/shop/produkt/solid-state-relais_ust_3-32vdc_ulast_24-280v-22691, sollte identisch sein. |
| 31 | Bei 15A braeuchte es einen Kuehlkoerper von 4,3K/W bei 30°C Umgebungstemperatur. 3,5K/W mehr als ausreichend. |
||
| 32 | |||
| 33 | 48 | Maximilian Seesslen | |
| 34 | 17 | Maximilian Seesslen | h2. Traffo |
| 35 | 1 | Maximilian Seesslen | |
| 36 | 17 | Maximilian Seesslen | Traffo: CFM50S480 |
| 37 | 20 | Maximilian Seesslen | > LRS-75-36; zumindest ein Kaefig; 36V; |
| 38 | 21 | Maximilian Seesslen | LRS-75-24; 24V; |
| 39 | 1 | Maximilian Seesslen | |
| 40 | 39 | Maximilian Seesslen | Old: |
| 41 | 41 | Maximilian Seesslen | GLP GPV-60-36 (Reichelt 16,95Euro) |
| 42 | 39 | Maximilian Seesslen | 60 W, 36 V DC, 1,67 A; der koennte eh "nur" 4,771428571 COBs betreiben. |
| 43 | |||
| 44 | 14 | Maximilian Seesslen | h2. Regler |
| 45 | |||
| 46 | 24 | Maximilian Seesslen | Regler: LDB-350L; 8,28Euro; vertraegt 36V und kann bis 40V boosten. Ich hab ja eh noch welche. |
| 47 | 22 | Maximilian Seesslen | |
| 48 | 14 | Maximilian Seesslen | LDH-45A-350 koennte 2 seriel bei 12V Versorgung. |
| 49 | "DC/DC Wandler":https://www.tme.eu/de/katalog/dc-dc-wandler_100320/ |
||
| 50 | 1 | Maximilian Seesslen | 34,4V × 4 = 137,6V |
| 51 | 15 | Maximilian Seesslen | 34,4V × 2 = 68,8V |
| 52 | 1 | Maximilian Seesslen | Fuer hoehere SPannung ganz schoeno Klopper. |
| 53 | 21 | Maximilian Seesslen | |
| 54 | Gehen nur bis 32V: |
||
| 55 | LDD-350L billig und putzig: 22.6*9.9*8.9mm; 3,10Euro |
||
| 56 | LDD-300L verfuegbar. |
||
| 57 | 15 | Maximilian Seesslen | |
| 58 | 1 | Maximilian Seesslen | h2. LED |
| 59 | 16 | Maximilian Seesslen | |
| 60 | 25 | Maximilian Seesslen | LEDs: |
| 61 | * BXRE-65S1001-C-74; "#110"; 360mA: BXRH-27G1000-B-83 ist die warme variante |
||
| 62 | 13 | Maximilian Seesslen | > CLL020 |
| 63 | 10 | Maximilian Seesslen | > 13,5x13,5mm, 2xR2.0 |
| 64 | 12 | Maximilian Seesslen | "LED-Liste":https://www.tme.eu/de/katalog/led-leistungsdioden-weiss-cob_113365/?params=1113:1507302;1101:1508789,1602816&onlyInStock=1 |
| 65 | 4 | Maximilian Seesslen | COB-Halterung: 8100/G2 |
| 66 | 26 | Maximilian Seesslen | |
| 67 | 54 | Maximilian Seesslen | "Datasheet":https://www.tme.eu/Document/b38f252da423a84c4114b843212401d8/BXRE-XXS1001-X-7X.pdf |
| 68 | |||
| 69 | 38 | Maximilian Seesslen | 34,4V*0,360A=12,384W |
| 70 | 95,55555556 Ohm |
||
| 71 | 95,55555556 Ohm * 0,350A = 33,44V |
||
| 72 | 33,44V*0,350A=11,704W |
||
| 73 | |||
| 74 | 26 | Maximilian Seesslen | h2. Powermeter |
| 75 | |||
| 76 | * INA226; 36V |
||
| 77 | |||
| 78 | h2. Open points |
||
| 79 | |||
| 80 | 32 | Maximilian Seesslen | Laeuft MCU mit Batterie los? RTC hat einen Ausgang, koennt klappen. |
| 81 | Testen am Eval-Board. |
||
| 82 | |||
| 83 | 27 | Maximilian Seesslen | |
| 84 | h2. MCU |
||
| 85 | |||
| 86 | 28 | Maximilian Seesslen | * STM32G441KBT6 LQFP32; "DS":https://www.st.com/resource/en/datasheet/stm32g441kb.pdf |
| 87 | 29 | Maximilian Seesslen | 32Pin zu klein |
| 88 | 30 | Maximilian Seesslen | |
| 89 | * STM32F072C8U6; UFQFPN48 |
||
| 90 | 31 | Maximilian Seesslen | |
| 91 | 1 | Maximilian Seesslen | h2. Kuehlkoerper |
| 92 | 34 | Maximilian Seesslen | |
| 93 | 53 | Maximilian Seesslen | [[Calc]] |
| 94 | 35 | Maximilian Seesslen | "Kuehler":http://www.led-tech.de/de/50x50mm-Kuehlkoerper-fuer-Square-50 |
| 95 | 36 | Maximilian Seesslen | SK58410AL |
| 96 | SK57850AL |
||
| 97 | SK57710AL 2,3K/W; 2,15€ |
||
| 98 | 53 | Maximilian Seesslen | |
| 99 | 36 | Maximilian Seesslen | |
| 100 | 37 | Maximilian Seesslen | h2. NTC |
| 101 | |||
| 102 | NTCC-10K |
||
| 103 | |||
| 104 | 42 | Maximilian Seesslen | h2. Calc |
| 105 | |||
| 106 | ADC 36V |
||
| 107 | |||
| 108 | r2=1000 |
||
| 109 | r1=12000 |
||
| 110 | U_MAX=(3*(12000+1000))/1000=39 |
||
| 111 | |||
| 112 | ADC 5V |
||
| 113 | |||
| 114 | r2=1000 |
||
| 115 | r1=1000 |
||
| 116 | U_MAX=(3 × (1000 + 1000)) / 1000 = 6 |
||
| 117 | 33 | Maximilian Seesslen | |
| 118 | 31 | Maximilian Seesslen | h2. Todo |
| 119 | |||
| 120 | 43 | Maximilian Seesslen | Eval board |
| 121 | 44 | Maximilian Seesslen | |
| 122 | h2. Summary |
||
| 123 | |||
| 124 | 4x11,704W LED, 47W |
||
| 125 | 49 | Maximilian Seesslen | Via Modul 8x11,704W LED, 93,6W; ca 3A |
| 126 | 4x240V, 2A, 1920W total |
||
| 127 | Via Modul 16A@230V = 3680W |