Aktivität

von 04.10.2022 bis 02.11.2022

10:48 Feature #295 (Erledigt): have an alias name for the device: Maximilian Seesslen
10:48 Feature #295 (Erledigt): have an alias name for the device: Show either the serial number or the device alisa name on the display. Maximilian Seesslen
10:47 Feature #293 (Erledigt): Bringup: add calibration measurement functions: Maximilian Seesslen
10:46 Fehler #279 (Erledigt): ADC breaks after buzzer alarm: It was the STOP mode in delay() which reseted periphery. Maximilian Seesslen

17:48 Feature #293: Bringup: add calibration measurement functions: Actually not needed but implemented.
The values are quite close.
Serno.1: 4031
Serno.2: 4029
Maximilian Seesslen

14:42 Fehler #279: ADC breaks after buzzer alarm: This can be added to bringup tests. Maximilian Seesslen
14:39 Feature #293 (Erledigt): Bringup: add calibration measurement functions: Device should be able to calibrate itself and store the values in eeprom.
Maximilian Seesslen

10:57 Fehler #286 (Abgewiesen): ADC breaks after buzzer alarm: Duplicate Maximilian Seesslen

11:20 Fehler #279: ADC breaks after buzzer alarm: return ADC value 0 and set heartbeat led to error blinking. Maximilian Seesslen
11:19 Fehler #286 (Abgewiesen): ADC breaks after buzzer alarm: Reason unclear.
At least the "trouble"-mechanism of sensemux could be used to indicate the problem via LED.
Assum... Maximilian Seesslen
10:46 Fehler #283 (Erledigt): SPI Flash not working: Error in App-file; CS was not used. Maximilian Seesslen

11:11 Fehler #283 (Erledigt): SPI Flash not working: Test fails.
Size is "0".
Did the previous test report work?
Maximilian Seesslen
11:10 Feature #280 (Erledigt): Show Serial number in display: Maximilian Seesslen
11:09 Feature #281 (Erledigt): Display: Version: dont show SHA: Maximilian Seesslen

19:04 Feature #281 (Erledigt): Display: Version: dont show SHA: Not enough space. Implement a compact string in libcampo.
Maximilian Seesslen
19:02 Feature #280 (Erledigt): Show Serial number in display: I did not even mark the PCB :/ Maximilian Seesslen
18:55 Fehler #279 (Erledigt): ADC breaks after buzzer alarm: Reason unclear.
At least the "trouble"-mechanism of sensemux could be used to indicate the problem via LED.
Assum... Maximilian Seesslen

20:07 Fehler #276 (Abgewiesen): GDB Breakpoints are not working: duplicate Maximilian Seesslen
16:32 Fehler #276 (Abgewiesen): GDB Breakpoints are not working: Can't write hwdata this way.
Working with debugger still works; i can hold and continue so pins are not completely m... Maximilian Seesslen
20:06 Fehler #277 (Erledigt): GDB Breakpoints are not working: "gdb_breakpoint_override hard" had to be set in openocd target file. Maximilian Seesslen
17:42 Fehler #277: GDB Breakpoints are not working: Depending on breakpoints gdb can call specific commands by itself;... Maximilian Seesslen
17:02 Fehler #277 (Erledigt): GDB Breakpoints are not working: Halting and continuing is working so general SWD-Pin-Configuration is not totally bad.
* Is openocd showing valid ... Maximilian Seesslen
16:28 Feature #255 (Erledigt): Start implementation of software: Maximilian Seesslen

10:53 Feature #274 (Erledigt): implement USB-Mode: When device is running on USB, the behaviour should be different.
* Fancy intro
* No timers can be started
* LED... Maximilian Seesslen

11:22 Feature #270 (Neu): Font in SPI-Flash: The drawText-function does not support fonts on SPI-Flash.
Not needed at the moment?
Maximilian Seesslen
10:55 Feature #255: Start implementation of software: Configuration in internal EEPROM missing. Maximilian Seesslen

Auch abrufbar als: Atom

Software » Minutnik eInk