Roadmap¶

Ongoing¶

• Minutnik eInk
• Lightswitch; (clock in bath)
• Kastella (i need plants)
• Candis-L, large Display.

To be started¶

• Lichtwecker
  • CANIO-L CANSwitch + CANDis
  • I think i made current controllers. Check needed heat sinks for LEDs. Check LED mounting.
  • Bottons
    • Confirm (Env-Alarm, Time-Alarm)
• Canbridge
• Meteor; The BME680 has an accurracy of 0.5°C typical. So an additional more precice temperature sensor would be nice
  • ordered TMP117, +-0.1°C at –20°C to 50°C; total operation range: –55°C to 150°C
• CANSpeaker; I have these bigger smd speakers. CANDisplay is not very loud.
  • Can give alarm when temperature is > 20°C. But needs an Button then.
  • Wecker with RTC.
  • Involved in Lichtwecker?
• Bathroom clock; Myse
• Fridgetemp
• IMU
• Comet PCB ersatz
• Weisswurstthermometer
  • Couple-Interface
  • Loud buzzer
  • USB interface for charging

(nearly) Finished¶

• BME680 adapter
• CAN-Rec mit SD-Karte
• MainSwitch; MainSwitch
• Amp
• Miniminutnik
  • Further Miniminutniks; v0.2.x; UART works at least in debug mode.
• CANIO (S)
• Temprec
• Slonce I
• Candisplay (i finally need light switches)
  • Test it on breadboard first
  • When it works: small cable adapter.
  • https://www.reichelt.de/dc-dc-wandler-am1p-z-1-w-5-v-200-ma-dil-8-sim1-0505s-dil8-p35039.html?search=sim1-0505
  • https://www.reichelt.de/dc-dc-wandler-tea-1-1-w-4-5-5-5-5-0-vdc-sil-4-tea-1-0505-p288651.html
• CANSwitch

Dropped¶

• CANIO L
• Lighttimer/Switchbox
  • CANIO-L
• Sensemux
  • verificate some stuff. CANSpeaker, Sensors, alarm-clock, plant-lamp
• CANControl, Is this really needed
  • Controller with RTC, automatic on/off of CANSwitches
  • Controlls Kastella
• Isoler; small dc/dc adapter, 2 LEDs
• Mini-Candis mit OLED-Display; was bringts mir ueberhaubt?