Design rules » Historie » Version 13
Redmine Admin, 30.09.2021 18:40
| 1 | 1 | Redmine Admin | h1. Design rules |
|---|---|---|---|
| 2 | |||
| 3 | 2 | Maximilian Seesslen | h2. Traces |
| 4 | |||
| 5 | 1 | Redmine Admin | min. drill diameter: >=0,3mm |
| 6 | min. trace width: 0,150mm |
||
| 7 | pad diameter DuKo: 0,6mm (spec. 0,7mm?) |
||
| 8 | 10 | Maximilian Seesslen | hole to hole: 0,35mm (not specificated. Via was missing. Wert empirisch. Does not happen when following other design rules) |
| 9 | 1 | Redmine Admin | |
| 10 | 2 | Maximilian Seesslen | h2. Text varnish |
| 11 | |||
| 12 | Lack: |
||
| 13 | 8 | Maximilian Seesslen | Gut, fuer längeren Text: |
| 14 | 4 | Maximilian Seesslen | 0,7x0,7; Staerke 0,1mm (NUC64Debug V0.2.x) |
| 15 | 2 | Maximilian Seesslen | (zu klein fuer Schrift in Copper) |
| 16 | |||
| 17 | Zu klein: |
||
| 18 | 0,4x0,4; Staerke: 0,05 (CAN/IO) |
||
| 19 | |||
| 20 | 6 | Maximilian Seesslen | Geht noch: |
| 21 | 3 | Maximilian Seesslen | 0,6x0,6; Staerke: 0,05 (CANDisplay::Eval) |
| 22 | 2 | Maximilian Seesslen | |
| 23 | 12 | Maximilian Seesslen | Geht noch, eher nicht kleiner: |
| 24 | 9 | Maximilian Seesslen | 0,55x0,55; Staerke: 0,15 (CAN/IO v0.6.x) |
| 25 | |||
| 26 | 2 | Maximilian Seesslen | h2. Text copper |
| 27 | |||
| 28 | Copper: |
||
| 29 | |||
| 30 | Gut unverzinnt: |
||
| 31 | 0,6x0,6; Starke 0,08mm |
||
| 32 | |||
| 33 | schlecht verzinnt: |
||
| 34 | 0,7x0,7; Staerke 0,1mm (NUC64Debug) |
||
| 35 | |||
| 36 | 5 | Maximilian Seesslen | nearly ok: |
| 37 | 7 | Maximilian Seesslen | 0,75x0,75; Staerke 0,15mm (Candisplay Eval) |
| 38 | 1 | Redmine Admin | |
| 39 | 11 | Maximilian Seesslen | Still dots not ok: |
| 40 | 1 | Redmine Admin | 0,8x0,8; Staerke 0,2mm (CANIO 0.6.x) |
| 41 | 11 | Maximilian Seesslen | |
| 42 | next test: |
||
| 43 | 13 | Redmine Admin | 0,85x0,85; Staerke 0,25mm (EEPROM) |