Aktivität - Biwak - Redmine

Aktivität

von 07.10.2024 bis 05.11.2024

05.11.2024

23:28 Revision c1148391 (libbiwak3): added check for configuration plausibility: Redmine Admin

04.11.2024

16:21 Feature #575 (Abgewiesen): Implement function to configure OSC with HSI only: The HAL-OSC-Config function is quite large.It has to contain every scenario.
An HSI-only version should shrink binar... Maximilian Seesslen
16:09 Fehler #568 (In Bearbeitung): flash-i2c: avoid delays; check for busy: Create statistic, how long it may need.
Maximilian Seesslen

01.11.2024

19:30 Revision 3f1c69aa (libbiwak3): updated changelog for v2.10.1: Redmine Admin
19:22 Revision 617504a4 (libbiwak3): uart: added delay when uart is busy: Needed in bringup Redmine Admin
19:21 Revision d01d851e (libbiwak3): i2cflash: writeData: return specific error code when waitBusy() failed: Redmine Admin
19:20 Revision 239d1fc1 (libbiwak3): i2c: waitBusy: added delay: It can happen that HAL_I2C_IsDeviceReady returns immediately
with an error.
An delay is needed to give device a chanc... Redmine Admin
19:18 Revision 60fab84a (libbiwak3): fixed debug output: Redmine Admin
19:17 Revision d14518e1 (libbiwak3): can: adopted HAL changes: The values for macros like FDCAN_DLC_BYTES_8 changed.
Previously the values had to be shifted to get the real
can mes... Redmine Admin
19:15 Revision 30377a94 (libbiwak3): flash: fixed shadowed attribute: acquireMemory() could fail. Redmine Admin

31.10.2024

20:26 Revision ac358977 (libbiwak3): updated changelog for v2.10.0: Redmine Admin

30.10.2024

20:32 Revision a008179b (libbiwak3): function in own compile unit can not be constexpr: Redmine Admin
20:17 Revision 766cd68c (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
20:12 Revision 3b49a2e5 (libbiwak3): shrink: Redmine Admin
20:12 Revision 3a7a5ff4 (libbiwak3): spi: make nested spi chipselect configurable: Redmine Admin
18:33 Revision 1435e55f (libbiwak3): fixed typo: Redmine Admin
17:02 Revision a77a5991 (libbiwak3): fixed building for host: Redmine Admin
16:37 Revision f73a73db (libbiwak3): downsize: Redmine Admin
13:57 Revision 9a03ac82 (libbiwak3): ignore volatile for HAL header also for STM32L4: Redmine Admin
13:47 Revision 845784a4 (libbiwak3): ignore volatile for HAL header also for STM32G4: Redmine Admin
13:40 Revision e30aa33b (libbiwak3): ignore volatile for HAL header also for STM32G0: Redmine Admin
11:16 Revision 6a4ea277 (libbiwak3): ignore volatile for HAL header only for STM32L1: Redmine Admin
11:12 Revision 071d3aab (libbiwak3): ignore -Wvolatile for HAL WKUP header: mpu_armv7.h uses an "|=" operation on a volatile register, which is not
allowed any more.
So "-Wvolatile" has to be i... Redmine Admin

29.10.2024

22:57 Revision a2c48f02 (libbiwak3): fixed compilation for host: Redmine Admin
22:10 Revision db7a0037 (libbiwak3): wkup: fixed compiling for host: Redmine Admin
22:04 Revision b0599af2 (libbiwak3): cmake: added wkup.cpp: Redmine Admin
20:54 Revision 4e7580ed (libbiwak3): fixed building for host: Redmine Admin
20:17 Revision ed2771d1 (libbiwak3): updated for building for host: Redmine Admin
15:17 Revision 93119153 (libbiwak3): linkerscript: fixed building miniminutnik: "*(.got*)" is needed to be present in the data section.
Otherwise linking breaks without expressive message. Redmine Admin

28.10.2024

23:07 Revision 3f84b753 (libbiwak3): remove declaration of pwm event loop: Redmine Admin
22:10 Revision ac52a7b2 (libbiwak3): fixed using config define: Redmine Admin
21:49 Revision e48b2005 (libbiwak3): cleanup delay functions: Redmine Admin

27.10.2024

06:42 Revision 8f686c94 (libbiwak3): disabled debug for retain.cpp: Redmine Admin

26.10.2024

15:16 Revision b7768d79 (libbiwak3): TSC2007: added CMD_SETUP, readInput(): Redmine Admin
11:53 Revision 9a8093a8 (libbiwak3): fixed building for stm32l4: Redmine Admin
11:47 Revision dd1fcc7f (libbiwak3): fixed building on stm32l1: Redmine Admin
11:44 Revision f4f9e5a9 (libbiwak3): fixed building on stm32l1: Redmine Admin
11:40 Revision 8efe17ca (libbiwak3): fixed building for STM32L0: Redmine Admin
11:31 Revision 2a7c28ad (libbiwak3): fixed building: Redmine Admin
11:20 Revision b5b66993 (libbiwak3): fixed building: Redmine Admin

24.10.2024

16:37 Revision cd04081f (libbiwak3): enabled rupdateFrequency() for STM32F3: No idea why this was disabled before. Redmine Admin
16:34 Revision a7b44273 (libbiwak3): formating: Redmine Admin
16:34 Revision 517978c3 (libbiwak3): added "alarm" blink mode: Redmine Admin
16:34 Revision c07cd8cb (libbiwak3): Fixed building for STM32F3X: adopted biwak changes Redmine Admin

14.10.2024

14:45 Revision f665a76c (libbiwak3): adopted biwak changes: Redmine Admin

12.10.2024

17:06 Revision 442a8ea6 (libbiwak3): fixed building on stm32g4: Redmine Admin
14:21 Revision 8b1be2f6 (libbiwak3): Implemented data event: In order to not miss any CAN messages the eventloop in the main application
has to get called at high frequency. Its ... Redmine Admin
13:15 Revision 1918e7a3 (libbiwak3): i2c: made interrupt optional: This saves some bytes. in master mode the interrupt is not needed at
all. Redmine Admin
13:15 Revision a465908a (libbiwak3): timer: made interrupt optional: saves some bytes Redmine Admin
13:14 Revision 01fbe0cb (libbiwak3): timer: remove member for frequency: This saves some bytes Redmine Admin
11:16 Revision 3518a901 (libbiwak3): Fader: dont use delta in calculation: Using deltas is saving some bytes. But its unprecise and errornous when
the cycle time is very short. Redmine Admin
11:14 Revision 9ccd08c2 (libbiwak3): added unit test for fader class: Redmine Admin

10.10.2024

19:48 Revision 2d07af93 (libbiwak3): Merge branch 'downsize' into devel: Redmine Admin
19:47 Revision a68b2289 (libbiwak3): Merge branch 'i2c_eeprom_fix' into devel: Redmine Admin
19:46 Revision 2c51fe53 (libbiwak3): fixed writing to eeprom overĺapping write page boundaries: Write page boundaries may not be crossed in a single i2c write instruction. Redmine Admin

08.10.2024

22:29 Revision 6e6aeda9 (libbiwak3): downsize: Redmine Admin
18:34 Feature #572 (Erledigt): Linker script: add ram area for vector table: At the moment RAM starts right after the ram-vector-table. This is ok but there is no section for vector table.
I as... Maximilian Seesslen

07.10.2024

14:41 Feature #570 (Erledigt): shrink binary size once again: The CTimer is a little bit nasty.
* let it work again; i forgot to set the instance somewhere.
* remove the memse... Maximilian Seesslen

Auch abrufbar als: Atom