Aktivität

von 14.09.2024 bis 13.10.2024

14:30 Revision 36c4cc30 (libbiwak3): Handle CAN TX error event: An event may result in another CAN message. To avoid infinite loop the error
event is only send once when the problem... Redmine Admin
12:40 Revision 7744fb6b (libbiwak3): Increased number of CAN rx buffers: 24 buffers has still problem when a lot of devices get scanned. Redmine Admin
12:12 Revision 7ed01d74 (libbiwak3): shrink bootloader by 0x400: Redmine Admin
11:28 Revision 3c41950b (libbiwak3): i2c: implemented waitBusy(): EEPROMS need some time to write data. A fixed delay is not very
performant.
Check if device is acknowdleging to verif... Redmine Admin

17:14 Revision f1e47c2d (libbiwak3): flash intern: added writeData64(): Old implementation is not very clean. Flashing firmware is aligned by
default. Redmine Admin
17:13 Revision d926c301 (libbiwak3): linker script: drop some sections: Redmine Admin
17:13 Revision 2c1ab61a (libbiwak3): Option bytes: Flash does not need to be unlocked: Redmine Admin
17:12 Revision 0bbee05a (libbiwak3): introduced BIWAK_I2C_NODE_ABSENT: Some devices have fixed i2c setup. Redmine Admin
17:11 Revision 4c28cda2 (libbiwak3): remove exception function with string parameter: Not much sense, better try to save some bytes instead. Redmine Admin
17:09 Revision 93ea2951 (libbiwak3): Constify: Redmine Admin

17:15 Revision 14f5571c (libbiwak3): fixed writing flash pages: Redmine Admin

10:34 Revision 9a33d2f4 (libbiwak3): Merge branch '500-qt-integration' of /data/srv/git/libbiwak into 500-qt-integration: Redmine Admin
10:31 Revision f4033d3c (libbiwak3): draft: Redmine Admin

11:04 Revision 5b72421c (libbiwak3): updated changelog for v2.9.0: Redmine Admin
07:33 Revision dbf32945 (libbiwak3): moved imago from campo to lepto: Redmine Admin
06:21 Revision 22da804e (libbiwak3): support dummy spi for host tests: Redmine Admin
06:13 Revision 2da4d7eb (libbiwak3): linux: added eSpiMode3Mhz: Redmine Admin
05:47 Revision 3b1c5969 (libbiwak3): qt-board: add dummy support for SPI: Redmine Admin

18:26 Revision 9f0453b3 (libbiwak3): handle config defines corectly: Redmine Admin
18:09 Revision b63d4a47 (libbiwak3): proper use of config defines: Redmine Admin
16:57 Revision 6633ee23 (libbiwak3): fixed config define: Redmine Admin
13:52 Revision 19ada3d4 (libbiwak3): use conpfig macros correctly: Redmine Admin
13:18 Revision 376b5b64 (libbiwak3): tests: check for some config macros: Redmine Admin
12:44 Revision e9486863 (libbiwak3): force git vcersion: Redmine Admin
12:40 Revision e240087a (libbiwak3): force git vcersion: Redmine Admin
12:31 Revision ba411717 (libbiwak3): force git vcersion: Redmine Admin
12:31 Revision 7f34bc14 (libbiwak3): force git vcersion: Redmine Admin
12:30 Revision 9a624188 (libbiwak3): force git vcersion: Redmine Admin
12:25 Revision 9e1af1ca (libbiwak3): fixed missing header: Redmine Admin
11:41 Revision d33895cc (libbiwak3): added configuration check: Redmine Admin

20:47 Revision 03ccb5e6 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
20:47 Revision d8364192 (libbiwak3): log: use ELogCode: Redmine Admin
20:31 Revision 1a11f076 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
20:26 Revision a58ad193 (libbiwak3): fixed merge conflict: Redmine Admin
20:21 Revision c9829765 (libbiwak3): call logHeartBeat() in logEventLoop(): Redmine Admin
20:18 Revision 544bc340 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
19:55 Revision c6118352 (libbiwak3): added tests for heartbeat behaviour: Redmine Admin
19:55 Revision df015962 (libbiwak3): fixes for new heartbeat implementation: Redmine Admin
19:53 Revision c5d3ead1 (libbiwak3): added lLogInfo(): Used to check which implementation is actually used. Tests have to
verify thatbiwaks implementation ius active. Redmine Admin

21:09 Revision 8f2f232a (libbiwak3): [#567] clean up Log-Heartbeat code: Avoid injecting the log event to ELogCategory.
Replace ELogCategory by ELogCode which also contains category and even... Redmine Admin

16:40 Revision 57e90eba (libbiwak3): log: fixed usage of config macros: Redmine Admin
16:39 Revision 3f615f0d (libbiwak3): dummy support for option bytes on host system: Redmine Admin
15:03 Revision fcd51cf7 (libbiwak3): fixed handling of configuration macros: Redmine Admin
13:06 Revision 2f135983 (libbiwak3): fixed config macro handling: Redmine Admin

22:59 Revision 8528c219 (libbiwak3): fixed merge conflict: Redmine Admin
22:58 Revision d016287d (libbiwak3): i2c_slave: use config macros correctly: Redmine Admin
22:14 Revision ca297574 (libbiwak3): fixed merge conflict: Redmine Admin
22:04 Revision 3de389be (libbiwak3): draft: Redmine Admin
22:03 Revision 2ac95ce2 (libbiwak3): added biwakPrintCompilerInfo(): Redmine Admin
22:00 Revision 743be98c (libbiwak3): uart: check for missing "AdvancedInit" in typedef: Redmine Admin
21:09 Revision c02dc271 (libbiwak3): fixed usagew of config macro: Redmine Admin
21:08 Revision 1f1db688 (libbiwak3): fixed log output: Redmine Admin
19:12 Revision 2fe99826 (libbiwak3): more expressive error output: Redmine Admin
18:41 Revision a9648563 (libbiwak3): cmake: stop biwak about missing config when surpressed: Redmine Admin
17:43 Revision 337a8010 (libbiwak3): fixed handling configuration macros: Redmine Admin
17:43 Revision d02662a2 (libbiwak3): cmake: depend all soucre files to config header: Redmine Admin

15:39 Revision 70e0c1a2 (libbiwak3): log: fixed header for default config: Redmine Admin
15:10 Revision 41d455e0 (libbiwak3): fixed usage of BIWAK_USE_INPUT_SIGNAL: Redmine Admin
14:29 Revision 5a7d644e (libbiwak3): cmake: cleanup: Redmine Admin
14:13 Revision 10f3698e (libbiwak3): fixed test for logging: Redmine Admin
14:04 Revision 7e576f5a (libbiwak3): cmake: include config header automatically: Redmine Admin
09:51 Revision a2f1fb43 (libbiwak3): i2c: use leptos IS_ENABLED: Redmine Admin
09:51 Revision b2409cf4 (libbiwak3): constify: Redmine Admin

Auch abrufbar als: Atom

Software » Campo » Biwak