Redmine

06.01.2022

14:46 Biwak Unterstützung #128 (Erledigt): Rework interrupts

The different ways, tables and stuff is anoying. Want to safe some flash memory. Maximilian Seesslen

27.12.2021

17:08 TCB Fehler #116 (Erledigt): Dont use autotools from host

Maximilian Seesslen

16:22 TCB Fehler #116 (Erledigt): Dont use autotools from host

Maximilian Seesslen

26.12.2021

15:05 TCB Fehler #48 (Erledigt): texinfo version has to match host systems version of texinfo

Maximilian Seesslen

25.12.2021

14:06 TCB Feature #52 (Erledigt): remove the per-family ld-scripts

Maximilian Seesslen

17.12.2021

14:51 miniminutnik Fehler #115 (Erledigt): LEDs stay on some times

Some times an item LED stays on when iterating through the items. Redmine Admin

14:49 miniminutnik Feature #111 (Abgewiesen): Configurable loudness

Sound is strange when duty cycle gets low.
This will be more confusing than a cool feature. Redmine Admin

15.12.2021

16:46 miniminutnik Feature #103 (Abgewiesen): implement Wartungsmodus

Redmine Admin

16:45 miniminutnik Feature #103: implement Wartungsmodus

User has to press reset (and enter) before gdb connects. Implemented in Campo-Script. Redmine Admin

14.12.2021

17:06 miniminutnik Feature #103: implement Wartungsmodus

check:
* bring device into sleep mode
* hold reset
* connect with OpenOCD/gdb
* try to hold it somehow
* set b... Redmine Admin

14:27 Miniminutnik Fehler #110: Replace buzzer

MOSFET will probably arrive in CW50.
Lets see if it will help.
The Transistor variant works with 2V (current unknow... Redmine Admin

13.12.2021

14:24 Miniminutnik Feature #109: Implement HWData

Its Software Redmine Admin

13:12 Miniminutnik Feature #114 (Erledigt): Device must run with 2Volts

The white LED probably has to be replaced.
-The violet led was not so picki (The one at the debug board can be ens... Redmine Admin

10.12.2021

14:42 miniminutnik Feature #111 (Abgewiesen): Configurable loudness

The loudness should be configurable.
PWM width has influence of loudness and battery livetime.
Redmine Admin

12:47 Miniminutnik Fehler #110: Replace buzzer

The 60V specified NMOS is not good.
Better use an LGE2300-LGE; Specification is 9A at VGS=3,0V and VDS=3,0V, ca. 40m... Redmine Admin

09.12.2021

15:21 Miniminutnik Fehler #110 (Erledigt): Replace buzzer

The buzzer is not loud enough.
Its ok when running at 3V3;
Use another one with rated 3V: LD-BZEL-T30-0802
But... Redmine Admin